Browse Resources

This resource discusses using the National Instruments digital I/O high-reliability feature set for industrial applications. "This white paper describes the operation of these features, demonstrates the features in typical scenarios, and illustrates how to program the features in LabVIEW." This...

This video, provided by Columbia Gorge Community College, is the first part of a two part lecture that discusses V/Hz control for motor drives. This lecture defines base and maximum frequency, and examines "simple linear V/Hz profiles and more advanced quadratic V/Hz profiles, dual slope V/Hz...

This video, provided by Columbia Gorge Community College, is the second part of a two part lecture that discusses V/Hz control for motor drives. This lecture defines base and maximum frequency, and examines "simple linear V/Hz profiles and more advanced quadratic V/Hz profiles, dual slope V/Hz...

This video, published by Columbia Gorge Community College, is the first part of a two part lecture that examines vacuums in pneumatic systems, discussing "how vacuum conditions are measured, how vacuum is generated, and how vacuum is employed." This first part of the lecture primarily focuses on...

This video, published by Columbia Gorge Community College, is the second part of a two part lecture that examines vacuums in pneumatic systems, discussing "how vacuum conditions are measured, how vacuum is generated, and how vacuum is employed." This video primarily focuses on different methods to...

This set of instructions, created by Robert L. Kershaw, help individuals in any setting develop their own Variable Speed ROV (Remotely Operated Vehicle) controller. As Kershaw explains in the introduction: "The goal for this project was creating a low cost, 3 axis (X-Y-Z) control box. The control...

This video, provided by Columbia Gorge Community College, is the first part of a two part lecture that examines virtual relays. The main objective of the lesson is to "introduce virtual relays as employed in PLC programs[,] examine software generated holding instructions as well as set/latch and...

This video, provided by Columbia Gorge Community College, is the second part of a two part lecture that examines virtual relays. The main objective of the lesson is to "introduce virtual relays as employed in PLC programs[,] examine software generated holding instructions as well as set/latch and...

This presentation, created by Terry Bartelt of the Wisconsin Online Resource Center, examines how voltages and currents vary in a series RLC circuit as the applied frequency changes.

This webinar was presented by the Maricopa Advanced Technology Education Center (MATEC) High Tech Workforce Initiative on October 1, 2010. This webinar discusses Field Programmable Gate Array (FPGAs curriculum validation with industry. Under an externship for the High Tech Workforce Initiative,...